Construction Specifier

JANUARY 13, 2025

Abrams is passionate about bridging the gap between drawing and specification intent design intent. Chris Bennett, CSC, iSCS, CDT, is a concrete consultant in Portland, Ore. He has trained thousands of architects, engineers, and contractors on how to produce better results and reduce risk in concrete. Ryan Stoltz, P.E.,

Concrete 105

Concrete Design CSI AIA 105

Construction Cost Estimating

AUGUST 29, 2019

Reinforcement Detailing or Rebar detailing is a detailed construction engineering process normally accomplished by the Rebar fabricators, structural engineering consultants or the contractors for generating ‘shop/placing’ drawings or shop drawings and bar bending schedule of steel reinforcement for construction.

Guidelines 40

Guidelines Drawings Structural Engineering Schedule 40

DebunkTheBIM

NOVEMBER 2, 2011

The structural engineer sizes the concrete column; the architect places it in the space. There is a code on the structural drawing that can be tracked to the schedule and the dimensions are noted. They both are confident to be following well established building-documenting practices.

Structural Engineering 48

Structural Engineering CAD BIM Modeling 48

BD+C

JULY 8, 2024

0 qpurcell Mon, 07/08/2024 - 09:59 Virtual Reality With the aid of virtual reality and three-dimensional visualization technologies, designers, consultants, and their clients can envision a place as though the project were in a later stage. Architects are trained to interpret 2D drawings and imagine designs in our heads.

Consulting 52

Consulting Modeling Drawings Visualization 52

Autodesk Construction Cloud

JANUARY 10, 2024

We have our sustainability consultants who open our eyes to sustainable ways of design that architects usually overlook. This means there's no longer any doubt over where the latest version of a document is or whether we're working from the most up-to-date drawing.

BIM 119

BIM Management Design Autodesk 119

Revit OpEd

OCTOBER 16, 2013

It''s a fairly common practice to create separate floors for structure and finishes. The structural "layer" of a floor may actually be modeled by the structural consultant, assuming the structural engineer we are working with uses Revit and isn''t working directly in the same model with us (architecture bias in this post).

Drawings 53

Drawings Revit Modeling Documentation 53

Construction Cost Estimating

JANUARY 18, 2015

The process of estimation is making: Architects, Structural Engineers , and other building consultants drawings. It is usually arranged by surveyors and building estimators. The bill quantity generally made by a ‘taking of.

Estimating 40

Estimating Construction Structural Engineering Contract 40

CivilJungle

FEBRUARY 17, 2021

List of Civil Engineering Software: This software are substantially beneficial in Construction projects. Software Required for Drafting or Drawing. Software Required for 3d Modeling of Structure/Architecture. Software Required for Drafting or Drawing: The types of Software Required for Drafting or Drawing are as follows. #1a.

Software 52

Software Software Engineering CAD 52

BIM & Beam

JUNE 29, 2015

ABT Netherlands, a multi-disciplinary consultancy firm, focused on the structural engineering, civil engineering, architectural engineering, moved to BIM-based 3D rebar for concrete reinforced design and fabrication as a result of client demand. Read more on the ABT story: German version & English version.

Revit 40

Revit BIM Autodesk Modeling 40

Building Information Management

JULY 26, 2012

2M Design Consultants, Inc. Affiliated Engineers, Inc. AGR Consulting. AHA Consulting Engineers, Inc. Blue Camas Consulting Ltd. Doo Consulting, llc. Drawing Conclusions LLC. Dunlap & Partners Engineers. Exoterra | Architects+Consultants. Green Building Consulting.

Consulting 55

Consulting Green Architecture Sustainability 55

ProcurementExpress.com

NOVEMBER 30, 2016

To avoid the pitfalls of underfunded projects: set a realistic budget, and interview and hire the best consultants and contractors available. Another problem for too many consultants is that they do not take facility operations into account when designing a data center. An inexperienced project team. Theft of project funds.

Risk 52

Risk Construction Plans Structural Engineering 52

Revit OpEd

FEBRUARY 4, 2011

Draw the concept so it is easy to put on paper, on a printed sheet. Doesn't matter if it is angled or new fangled, just orient it so it is "easy" to draw. Let's assume you decide to hire a structural engineer (and MEP) and they use Revit too. The MEP consultant does the same. probably should).

Revit 56

Revit Modeling Site Documentation 56

CivilJungle

FEBRUARY 27, 2021

A column or pillar in architecture and structural engineering is a structural element that transmits, through compression, the weight of the structure above to other structural elements below. It is often found over portals, doors, windows, and fireplaces. In other words, a column is a compression member.

Foundation 52

Foundation Construction Drawings Housing 52

Rory Woolsey

MARCH 20, 2012

Converting scope to quantities requires a solid understanding of math, drawing scales, swell and waste factors, plan reading, common construction practices, and conversion factors. construction consultants. Quantifying the project is the next step in the estimating process. He is also affiliated with The Wool-Zee Company, Inc.,

Estimating 40

Estimating Construction Overhead Structural Engineering 40

Natural Building

JULY 27, 2008

Kelly has lived in an earthbag/papercrete home that he built and consults about sustainable building design. Is there any way to get any technical specs and/or architectural drawings of the round Tulou? structural engineering firms said. View my complete profile. California's Green Building Code. Strawboard Panels.

Architecture 53

Architecture Sustainability Green Defense 53

ProcurementExpress.com

NOVEMBER 30, 2016

To avoid the pitfalls of underfunded projects: set a realistic budget, and interview and hire the best consultants and contractors available. Another problem for too many consultants is that they do not take facility operations into account when designing a data center. An inexperienced project team. Theft of project funds.

Risk 40

Risk Construction Plans Structural Engineering 40

CivilJungle

FEBRUARY 24, 2021

Also, Read: What Is Superstructures | Difference Between Load-Bearing and Framed Structures. While one should consult a professional architect, such as a carpenter, architect, or structural engineer, to ensure that the wall is Load Bearing or non Load Bearing, there are a number of indicators you can check for to get the initial answer.

Construction 52

Construction Housing Concrete Foundation 52

Rory Woolsey

MAY 31, 2012

General Requirements: A general contractors site management expenses for such necessities as a superintendent, project manager; site trailers, schedule management, quality control, daily clean up, security, safety, site phones, record drawings and project commissioning all fall under the category of general requirements OR project site overhead.

Estimating 40

Estimating Overhead Profitability Remodeling 40

Construction Specifier

DECEMBER 15, 2024

Wind loads are quantified using ASCE/SEI 7, Minimum Design Loads and Associated Criteria for Buildings and Other Structures, published by the American Society of Civil Engineers (ASCE) and the Structural Engineering Institute (SEI). Criteria should be listed on the first sheet of the structural drawings.

Design 52

Design Commercial Architecture Engineering 52

Autodesk Construction Cloud

AUGUST 15, 2023

This implementation encompassed various teams, including the consultants, contractors, manufacturing divisions, and other stakeholders. As we know, construction teams go through a lot of paper—much of that is used to print drawings, mark up documents, and the like. Wilson & Co. John Lim Ji Xiong, Gamuda Berhad Kavon Samimi, W.E.

Autodesk 52

Autodesk Construction Innovation BIM 52

Building Information Management

JULY 2, 2012

HVACie extends the existing Industry Foundation Class Coordination View including equipment and system information streamlining construction shop drawing and fabrication. Construction Engineering Research Laboratory. Hitchcock Consulting. Hitchcock Consulting 6049 Shoo Fly Road Kelsey, CA 95667. Model View Definition.

Documentation 40

Documentation Equipment Modeling Design 40

Building Information Management

JULY 2, 2012

HVACie extends the existing Industry Foundation Class Coordination View including equipment and system information streamlining construction shop drawing and fabrication. Construction Engineering Research Laboratory. Hitchcock Consulting. Hitchcock Consulting 6049 Shoo Fly Road Kelsey, CA 95667. Model View Definition.

Documentation 40

Documentation Equipment Modeling Design 40

Autodesk Construction Cloud

NOVEMBER 2, 2021

Ahmad ElMani , KEO International Consultants. She is known for supporting innovation and developing strong working relationships with clients, consultants, and contractors. Giana started her career in civil and structural engineering, working on both domestic and international programs. Dwayne Jeffery , Howard S.

Construction 52

Construction BIM San Francisco Management 52