Viewpoint Construction Technology

JANUARY 31, 2019

Department of Transportation and Federal Aviation Administration have proposed and will test a new regulation that, if approved, would allow drone operators to fly at night and over humans without first obtaining a waiver. The proof-of-concept flight included a twisting, 23-mile stretch of electrical transmission lines.

Industrial 200

Industrial United States Construction Infrastructure 200

Job Order Contracting

SEPTEMBER 12, 2018

De-energize, lock out, and tag electrical circuits. Inspect electrical power panel. Check electrical connections and wiring for loose or overheated conditions. Inspect control panel for loose connections. Inspect Bollard/Barricade coatings, decals and paint. Visually inspect for corrosion.

Inspections 100

Inspections Equipment Electrical Safety 100

Safety Services Company

JULY 19, 2021

If you need a reminder as to what NFPA 70E is, it’s the national standard for electrical safety in the workplace. According to the NFPA website , “NFPA 70E requirements for safe work practices is used to protect personnel by reducing exposure to major electrical hazards. What Changes Were Adopted to NFPA 70E in 2021?

OSHA 87

OSHA Electrical Safety Employment 87

Work Gearz

JANUARY 22, 2021

When you are involved with construction work that includes electrics you need to ask what class of hard hat for electrical work is needed. Given that construction and electrical work can be dangerous, it is important that workers are well protected at all times. Class E hard hats, electrical hard hats.

Electrical 52

Electrical Safety Accidents Regulation 52

Safety Services Company

NOVEMBER 20, 2013

The non-descript General Industry regulation 1910.305 which governs wiring methods, components and equipment for general use was responsible for 3,452 violations in 2013, making it the regulation that is the fifth most likely to trip up employers for citations in the United States. Wiring methods. Temporary Wiring.

Electrical 54

Electrical OSHA Regulation Equipment 54

Safety Services Company

NOVEMBER 20, 2013

The non-descript General Industry regulation 1910.305 which governs wiring methods, components and equipment for general use was responsible for 3,452 violations in 2013, making it the regulation that is the fifth most likely to trip up employers for citations in the United States. Wiring methods. Temporary Wiring.

Electrical 51

Electrical OSHA Regulation Equipment 51

Levelset

JULY 15, 2022

If you’re looking to start an electrical business, it’s the perfect time to flip the switch. Industry research shows that the US electrical industry has more than 1 million employees working for 200,000 businesses — and annual revenue exceeding $200 billion. Action item: Create a growth plan for your electrical company.

Electrical 52

Electrical Cash Flow Accounting Profitability 52

Safety Services Company

NOVEMBER 26, 2013

Violations of OSHA’s general industry regulations for Powered Industrial Trucks (1910.178), or forklifts went up from 1,993 in 2012, (7th most cited regulation) to 3,340 in 2013, (6th most citations). Inspection and maintenance the employee will complete. Electrical, Wiring (1910.305) – November 20. Limitations.

OSHA 69

OSHA Industrial Regulation Electrical 69

Pro Builder

JULY 1, 2022

The International Code Council (ICC) oversees the development of building codes that regulate how buildings are constructed, including the International Energy Conservation Code (IECC). Requiring electric vehicle charging capability or readiness. Requiring grid-interactive equipment for demand response. Requiring ASHRAE 62.2

NAHB 98

NAHB Feasibility Life Cycle Inspections 98

Contractor Connection

SEPTEMBER 26, 2023

Whether you’re remodeling your kitchen, fixing a leaky roof, or upgrading your electrical system, you can rely on the Contractor Connection Network to connect you with the right professionals. This local knowledge ensures that your project is completed efficiently and in compliance with local regulations.

Contractors 98

Contractors Management Renovating Regulation 98

Safety Services Company

JANUARY 29, 2014

Are you confident that your business will survive an OSHA inspection without falling for the same violations that account for 45% more citations for the top 10 in 2013? Electrical power-line installers and repairers 23.0. Electrical, Wiring (1910.305). Electrical, General (1910.303). Top OSHA Violations 2013 Whitepaper.

OSHA 48

OSHA Injury Accidents Electrical 48

Safety Services Company

NOVEMBER 14, 2013

With 3,879 citations in 2013, General Industry regulation 29 CFR 1910.134 Respiratory Protection was the fourth highest cited violation for the last fiscal year. Just two examples of OSHA inspections resulting in serious violations gives insight. Electrical, Wiring (1910.305) – November 20. Selecting respirators. Fit testing.

OSHA 57

OSHA Inspections Accidents Regulation 57

Building Information Management

MAY 19, 2016

Federal Management Regulation – FMR, For Real Property. Emergency” includes bombings and bomb threats, civil disturbances, fires, explosions, electrical failures, loss of water pressure, chemical and gas leaks, medical emergencies, hurricanes, tornadoes, floods, and earthquakes. Postal Service for the transportation of mail.

Regulation 40

Regulation Puerto Rico Organization District of Columbia 40

Building Information Management

MAY 19, 2016

Federal Management Regulation – FMR, For Real Property. Emergency” includes bombings and bomb threats, civil disturbances, fires, explosions, electrical failures, loss of water pressure, chemical and gas leaks, medical emergencies, hurricanes, tornadoes, floods, and earthquakes. Postal Service for the transportation of mail.

Regulation 40

Regulation Puerto Rico Organization District of Columbia 40

Levelset

JUNE 29, 2022

In this article, we’ll look at the top 10 violations found during OSHA inspections in 2021, the cost of OSHA violations, and how to prevent them. OSHA averages more than 30,000 inspections annually , including many unscheduled visits arising from employee complaints or injuries. Citations: 5,465 Inspections: 5,327 Penalties: $28.8

OSHA 52

OSHA Inspections Construction Safety 52

Safety Services Company

APRIL 5, 2018

OSHA Inspections. Workplace inspections and investigations are conducted by OSHA compliance safety and health officers trained in safety and industrial hygiene. Inspections are conducted without advance notice. What does the inspection process involve? The officer will determine the route and duration of the inspection.

OSHA 48

OSHA Safety Inspections Employment 48

Safety Services Company

NOVEMBER 6, 2013

The third most cited OSHA violation in 2013 was the construction regulation on scaffolding (1926.451). OSHA’s Scaffold regulation also describes certain types of employees – competent person, qualified person, and engineer – and the duties that must be performed by them. Inspect synthetic rope being used as toprails or midrails.

OSHA 48

OSHA Inspections Accidents Regulation 48

Safety Services Company

NOVEMBER 6, 2013

The third most cited OSHA violation in 2013 was the construction regulation on scaffolding (1926.451). OSHA’s Scaffold regulation also describes certain types of employees – competent person, qualified person, and engineer – and the duties that must be performed by them. Inspect synthetic rope being used as toprails or midrails.

OSHA 48

OSHA Inspections Accidents Regulation 48

Safety Services Company

NOVEMBER 26, 2013

Violations of OSHA’s general industry regulations for Powered Industrial Trucks (1910.178), or forklifts went up from 1,993 in 2012, (7th most cited regulation) to 3,340 in 2013, (6th most citations). Inspection and maintenance the employee will complete. Electrical, Wiring (1910.305) – November 20. Limitations.

OSHA 48

OSHA Industrial Regulation Electrical 48

Construction Specifier

JANUARY 26, 2025

These stricter regulations aim to reduce energy consumption and enhance overall building performance, making air barriers a key element in todays construction practices. By preventing uncontrolled air movement between conditioned and unconditioned spaces, they help regulate indoor temperatures, control moisture, and improve energy efficiency.

Construction 64

Construction Commercial Residential Design 64

Pro Builder

AUGUST 5, 2022

across 36 separate and independent jobsite safety inspections by SFI conducted between January and March of this year. And some of Thrive’s trade partners commission similar safety inspections, reporting, and training from SFI. Request OSHA pre-inspections for every new jobsite. Falls are the most common jobsite accidents.

Safety 72

Safety Resource Injury Construction 72

Safety Services Company

DECEMBER 18, 2013

General Industry Regulation 1910.147, The Control of Hazardous Energy – better known as Lockout/Tagout (LOTO) – was the seventh most violated standard in 2013 with 3,254, more than twice as many as in 2012 (1,572). Next week’s topic is Electrical General. Electrical, Wiring (1910.305) – November 20.

OSHA 48

OSHA Permits Equipment Inspections 48

Safety Services Company

DECEMBER 18, 2013

General Industry Regulation 1910.147, The Control of Hazardous Energy – better known as Lockout/Tagout (LOTO) – was the seventh most violated standard in 2013 with 3,254, more than twice as many as in 2012 (1,572). Next week’s topic is Electrical General. Electrical, Wiring (1910.305) – November 20.

OSHA 48

OSHA Permits Equipment Inspections 48

Work Gearz

JANUARY 29, 2021

OSHA do indeed approve many of the vented hard hats, in particular for outdoor work, but have strict regulations with vents for indoor work, in particular when electrics are involved. No protection against electrical shocks. A vented hard hat does not offer protection against electrical problems. Meets ANSI/ISEA Z89.1-2009,

OSHA 52

OSHA Electrical Safety Regulation 52

Safety Services Company

FEBRUARY 5, 2020

Power sources can be electrical, hydraulic, mechanical, thermal, or pneumatic in nature. OSHA has established guidelines in dealing with hazardous energy, and a big part of their regulations requires companies to have procedures in place regarding how to disable the power sources of affected machinery.

Guidelines 62

Guidelines OSHA Injury Safety 62

Safety Services Company

FEBRUARY 4, 2020

Power sources can be electrical, hydraulic, mechanical, thermal, or pneumatic in nature. OSHA has established guidelines in dealing with hazardous energy, and a big part of their regulations requires companies to have procedures in place regarding how to disable the power sources of affected machinery.

Guidelines 62

Guidelines OSHA Injury Safety 62

Buisness Facilities Contributed Content

JUNE 27, 2016

In addition to military and national defense uses, UAS have multiple commercial applications, such as utility and construction companies’ ability to monitor pipelines and electrical grids along with public agencies and private companies inspections of bridges and other difficult-to-reach sites. said NMUASC CEO Jim Makowske.

Michigan 63

Michigan Industrial Defense Commercial 63

Work Gearz

OCTOBER 6, 2021

Contact with electrical wires, . Specific criteria for head protection in the workplace are mandated by OSHA regulations. Hard hat regulations are governed by two OSHA standards: . These two guidelines define workers to wear hard hats if there is a risk of head damage from impacts, falling items or electrical hazards.

OSHA 52

OSHA Safety Accidents Injury 52

Digger Blog

JANUARY 29, 2014

On the swing circle, extra care is required to prevent the bolts from loosening, and daily inspections are vital. One of the main challenges will be to introduce an electric model with a low-range voltage, because of high oil prices and strict emission regulations, it says.'

Modeling 54

Modeling Maine Environment Equipment 54

Construction and Infrastructure Law

MARCH 24, 2020

Amidst the ongoing Covid-19 pandemic, daily and sometimes hourly changes in federal, state, and local orders and regulations are significantly impacting the construction industry. This is especially true given that the localities are the ones that issue permits, schedule inspections and sign-off on work.

California 52

California Construction Los Angeles Infrastructure 52

Construction and Infrastructure Law

MARCH 24, 2020

Amidst the ongoing Covid-19 pandemic, daily and sometimes hourly changes in federal, state, and local orders and regulations are significantly impacting the construction industry. This is especially true given that the localities are the ones that issue permits, schedule inspections and sign-off on work.

California 52

California Construction Los Angeles Infrastructure 52

Safety Services Company

FEBRUARY 23, 2018

Make sure you know the regulations that apply to your work environment and how to comply with them. You know and understand OSHA regulations pertinent to the job you are doing. Many accidents are caused by equipment that wasn’t been properly maintained or inspected before use. Constantly inspect your work area for hazards.

Safety 48

Safety Accidents Equipment OSHA 48

Safety Services Company

MAY 10, 2018

Hazard Identification and Control: Your company should perform periodic inspections and have procedures of identifying existing or potential hazards in the workplace and eliminating or controlling them. Aside from regular inspections and review, the assigned supervisor will also conduct spot checks and random inspections.

Safety 48

Safety Injury Inspections OSHA 48

Building Radar

JULY 17, 2024

AI systems can monitor job sites in real-time, identifying potential hazards and ensuring compliance with safety regulations. Drones can provide aerial surveys and inspections, capturing high-resolution images and data that can be analyzed to monitor progress and identify issues.

Innovation 52

Innovation Construction Project Management Safety 52

Fieldwire

JANUARY 11, 2023

Many actions can be taken to make the sector greener and more sustainable: for instance investing in electric or hydrogen vehicles and heavy machinery, or in ecological materials such as low-carbon cement. Despite the clear advantages of digitalisation in construction, there is still some resistance.

Safety 52

Safety Accidents Injury Software 52

Levelset

NOVEMBER 10, 2022

Electrocution : Contact with overhead power lines and electrical power boxes presents risks that can lead to serious injury or death during the construction phase. . According to the Occupational Safety and Health Administration (OSHA), almost 3 out of 100 full-time workers were injured on the job in 2019.

Safety 52

Safety Site Injury Construction 52

Contractor Connection

SEPTEMBER 26, 2023

Whether you’re remodeling your kitchen, fixing a leaky roof, or upgrading your electrical system, you can rely on the Contractor Connection Network to connect you with the right professionals. This local knowledge ensures that your project is completed efficiently and in compliance with local regulations.

Contractors 40

Contractors Management Renovating Regulation 40